15.7 MMSCFD Syngas Plant for Sale
  • Category :  Featured Plants
  • Manufacturer :  Hydro-Chem
  • Plant Type :  Syngas
  • Capacity :  15.7 MMSCFD
Technical Drawings/Spec Sheets ( Requires: Get Acrobat Reader  )
View Documents 178_DOC1.pdf
ADDITIONAL DESCRIPTION

Hydro-Chem (now Linde) designed 15.7 MMSCFD (18,500 Nm3/hr) syngas reforming plant almost like new immediately available for purchase. The plant was built in 2016 and operated for only a few months. This plant was designed to use landfill gas and/or natural gas to produce synthesis gas, which is then converted into paraffinic naphtha, diesel and wax by Fischer-Tropsch process. The syngas output flow rate is at 500°F and 175 psig. The syngas has the following composition (mol %): Hydrogen 43.01, Carbon Monoxide 16.37, Carbon Dioxide 8.34, Nitrogen 3.90, Methane 1.42, Argon 0.16, Water 26.79. Capacity may be varied from the control panel from 100% of design to 40% of design. The syngas can also be further processed depending on the desired final products such as ammonia and methanol.

If potential client adds shift converter, PSA system, and an Amine System the assets could produce approximately 6-7 MMSCFD of pure Hydrogen.

Major Equipment:

Reformers #1 & #2

Feed Heater

Feed Superheater

Hydrodesulfurizer

Flue Gas Steam Generator

Reformer Effluent Steam Generator

Dirty Steam Drum

Clean Steam Drum

Combustion Air Preheater

Dearator

Compression

Can't find what you need? Click HERE to contact us.

We sell Complete Plants and Process Equipment on a Worldwide Scale. LCEC has locations around the globe, which gives us the ability to acquire entire Complete Plants for relocation. If you need Ammonia, Nitric Acid, Urea, Hydrogen, Methanol or any other Process Complete Plant, our strategic positioning can help you fill your need. Please contact us for more information. Let LCEC find the Complete Plant or Process Equipment you require.