61831 DRYERS
  • ITEM NO :  61831
  • QTY :  1
  • ALLOY :  C
  • TYPE :  TORUS DISC
  • MANUFACTURER :  BEPEX
  • MODEL :  60-14
  • SHELL MATERIAL :  CS
  • INTERNAL MATERIAL :  CS
  • DIA/WIDTH (FT'IN") :  8'0"
  • LENGTH (FT'IN") :  23'0"
  • PSI :  15
  • FULL VACUUM Y/N :  Y
  • TEMP. DEG. F :  385
  • JACKETED Y/N :  YES
  • JACKET MATERIAL :  CS
  • HP :  100
  • RPM :  12
  • VOLTAGE :  460
  • BATCH CAPACITY :  265 CUBIC FEET
  • LBS/HR (DRY) :  10
  • LBS/HR H2O REM :  0
  • HEAT MEDIA/RAT :  STEAM
  • ACCESSORIES Y/N :  Y
  • PREVIOUS SERVICE :  SLUDGE
Technical Drawings/Spec Sheets
ADDITIONAL DESCRIPTION
Installed and never used Bepex torus disc carbon steel dryer. Model 60-14. Built in 1986. It was designed to be used as a 1st stage hydroextractor to process 9.5 Short tons/hr of sludge; Designed for continuous operation. Material of construction is Carbon Steel. Vessel rated MAWP 15 psig/full vacuum @ 385 degree F, jacket rated MAWP 190 psig @ 385 degree F. The rotor is 60" diameter x 14'0" long, and is hard faced. The rotor is cored for steam heating and rated MAWP 190 psig @ 385 degree F. Heating medium is steam. Working volume 265 cubic feet. Total heat transfer area 1235 square feet. Trough is 69" wide x 177" long x 84" high with a vapor dome. Total height with dome cover is 154" high. Panel coil jacket on 25% of the dome cover. Continues product flow with retention time is controlled by adjustable product discharge weir. Rotor had hollow discs, and is chain and sprocket drive, 56 rpm output gear box, Agitator 12 rpm speed. Motor 100 HP, 3/60/460 volt 1800 rpm. Outboard bearings, packing glands with N2 seal purge, Johnson rotary joint on shaft. Openings: top vacuum cover - 1-24" with cover, 3-1 1/2", 3-10"; 24" side top with cover; side end discharge Weir access opening with cover 17" x 30"; 1-12" solids discharge bottom end. Approx dimensions 294" long x 84" wide x 154" high.